Summary of Study ST001331
This data is available at the NIH Common Fund's National Metabolomics Data Repository (NMDR) website, the Metabolomics Workbench, https://www.metabolomicsworkbench.org, where it has been assigned Project ID PR000909. The data can be accessed directly via it's Project DOI: 10.21228/M8668V This work is supported by NIH grant, U2C- DK119886.
See: https://www.metabolomicsworkbench.org/about/howtocite.php
This study contains a large results data set and is not available in the mwTab file. It is only available for download via FTP as data file(s) here.
Study ID | ST001331 |
Study Title | Multi-omics of OsGF14b-mediated innate immunity against panicle blast in rice (part-II) |
Study Summary | In the present study, we used a multi-omics approach to decipher the molecular mechanisms of OsGF14b in governing panicle resistance to Magnaporthe oryzae.Results revealed OsGF14b mediated panicle blast resistance was involved in the activation of auxin and JA signaling pathways, resulting in reprogramming of the phenylpropanoid and diterpenoid pathway. |
Institute | Agro-biological Gene Research Center , Guangdong Academy of Agricultural Sciences |
Last Name | Yan |
First Name | Shijuan |
Address | No. 20 Jinying Road, Tianhe District, Guangzhou City, Guangdong Province, 510640, China. |
shijuan@agrogene.ac.cn | |
Phone | +86-020-38213643 |
Submit Date | 2020-03-13 |
Raw Data Available | Yes |
Raw Data File Type(s) | raw(Thermo) |
Analysis Type Detail | LC-MS |
Release Date | 2020-12-31 |
Release Version | 1 |
Select appropriate tab below to view additional metadata details:
Combined analysis:
Analysis ID | AN002219 | AN002220 |
---|---|---|
Analysis type | MS | MS |
Chromatography type | Reversed phase | Reversed phase |
Chromatography system | Thermo Dionex Ultimate 3000 | Thermo Dionex Ultimate 3000 |
Column | Waters CORTECS C18 (150 x 2.1mm,2.7um) | Waters CORTECS C18 (150 x 2.1mm,2.7um) |
MS Type | ESI | ESI |
MS instrument type | Orbitrap | Orbitrap |
MS instrument name | Thermo Fusion Tribrid Orbitrap | Thermo Fusion Tribrid Orbitrap |
Ion Mode | POSITIVE | NEGATIVE |
Units | Relative content | Relative content |
MS:
MS ID: | MS002065 |
Analysis ID: | AN002219 |
Instrument Name: | Thermo Fusion Tribrid Orbitrap |
Instrument Type: | Orbitrap |
MS Type: | ESI |
MS Comments: | The spray voltage was set to 3500 V in the positive-ion modes, with the following ion-source properties: sheath gas, 45 Arbs; auxiliary gas, 10 Arbs; sweep gas, 0 Arbs; ion-transfer tube temperature, 320 °C; vaporizer temp, 350 °C. All FTMS data were acquired using the following conditions: detector type, orbitrap; orbitrap resolution, 120000; scan range was set to m/z 200-1200. The AGC was set at 5.0 e5 and the maximum injection time was set to 100 ms. RF lens was set to 60%, and the microscans was 1. data type, profile. All FTMS2 data were acquired using the following conditions: isolation mode, quadrupole; isolation window, 1 m/z; detector type, orbitrap; scan range, auto; AGC target, 5.0 e4; maximum injection time, 100 ms; microscans, 1; orbitrap resolution, 30000; first mass, 50 m/z; data type, profile. The HCD collision energy was set to 25% with ± HCD collision energy was set 5% in positive mode, and the HCD collision energy was set to 30% with ± HCD collision energy was set 5% in negative mode. All data was acquired by the Xcalibur 4.1 software (Thermo Fisher Scientific, USA). Thermo Scientific™ LipidSearch™ 5.0 software was used for lipidome data processing. |
Ion Mode: | POSITIVE |
MS ID: | MS002066 |
Analysis ID: | AN002220 |
Instrument Name: | Thermo Fusion Tribrid Orbitrap |
Instrument Type: | Orbitrap |
MS Type: | ESI |
MS Comments: | The spray voltage was set to -3000 V in the negative-ion modes, with the following ion-source properties: sheath gas, 45 Arbs; auxiliary gas, 10 Arbs; sweep gas, 0 Arbs; ion-transfer tube temperature, 320 °C; vaporizer temp, 350 °C. All FTMS data were acquired using the following conditions: detector type, orbitrap; orbitrap resolution, 120000; scan range was set to m/z 200-1200. The AGC was set at 5.0 e5 and the maximum injection time was set to 100 ms. RF lens was set to 60%, and the microscans was 1. data type, profile. All FTMS2 data were acquired using the following conditions: isolation mode, quadrupole; isolation window, 1 m/z; detector type, orbitrap; scan range, auto; AGC target, 5.0 e4; maximum injection time, 100 ms; microscans, 1; orbitrap resolution, 30000; first mass, 50 m/z; data type, profile. The HCD collision energy was set to 25% with ± HCD collision energy was set 5% in positive mode, and the HCD collision energy was set to 30% with ± HCD collision energy was set 5% in negative mode. All data was acquired by the Xcalibur 4.1 software (Thermo Fisher Scientific, USA). Thermo Scientific™ LipidSearch™ 5.0 software was used for lipidome data processing. |
Ion Mode: | NEGATIVE |