Return to study ST000397 main page
MB Sample ID: SA019064
Local Sample ID: | 140421ajlsa26_1 |
Subject ID: | SU000418 |
Subject Type: | Human |
Subject Species: | Homo sapiens |
Taxonomy ID: | 9606 |
Species Group: | Human |
Select appropriate tab below to view additional metadata details:
Subject:
Subject ID: | SU000418 |
Subject Type: | Human |
Subject Species: | Homo sapiens |
Taxonomy ID: | 9606 |
Species Group: | Human |
Factors:
Local Sample ID | MB Sample ID | Factor Level ID | Level Value | Factor Name |
---|---|---|---|---|
140421ajlsa26_1 | SA019064 | FL005146 | 1 | Data |
Collection:
Collection ID: | CO000412 |
Collection Summary: | The whole blood was separated using Ficoll gradient. |
Collection Protocol Filename: | StudyDesign_RussPoldrack_04.10.14.pdf |
Sample Type: | Blood |
Blood Serum Or Plasma: | Plasma |
Treatment:
Treatment ID: | TR000432 |
Treatment Summary: | These are samples from the same individual taken over the course of 18 months. We are interested in comparing these results to other measurements from the same individual, including RNA-seq and brain imaging. |
Treatment Protocol Filename: | StudyDesign_RussPoldrack_04.10.14.pdf |
Sample Preparation:
Sampleprep ID: | SP000425 |
Sampleprep Summary: | 1. Switch on bath to pre-cool at –20°C (±2°C validity temperature range) 2. Gently rotate or aspirate the blood samples for about 10s to obtain a homogenised sample. 3. Aliquot 30μl of plasma sample to a 1.0 mL extraction solution. The extraction solution has to be prechilled using the ThermoElectron Neslab RTE 740 cooling bath set to -20°C. 4. Vortex the sample for about 10s and shake for 5 min at 4°C using the Orbital Mixing Chilling/Heating Plate. If you are using more than one sample, keep the rest of the sample on ice (chilled at <0°C with sodium chloride). 5. Centrifuge samples for 2min at 14000 rcf using the centrifuge Eppendorf 5415 D. 6. Aliquot two 450μL portions of the supernatant. One for analysis and one for a backup sample. Store the backup aliquot in -20°C freezer. 7. Evaporate one 450μL aliquots of the sample in the Labconco Centrivap cold trap concentrator to complete dryness. 8. The dried aliquot is then re-suspended with 450 μL 50% acetonitrile (degassed as given above). 9. Centrifuged for 2 min at 14000 rcf using the centrifuge Eppendorf 5415. 10. Remove supernatant to a new Eppendorf tube. 11. Evaporate the supernatant to dryness in the Labconco Centrivap cold trap concentrator. 12. Submit to derivatization. |
Sampleprep Protocol Filename: | SOP_blood-GCTOF-11082012.pdf |
Combined analysis:
Analysis ID | AN000634 |
---|---|
Analysis type | MS |
Chromatography type | GC |
Chromatography system | Agilent 6890N |
Column | Restek Corporation Rtx-5Sil MS |
MS Type | EI |
MS instrument type | GC-TOF |
MS instrument name | Leco Pegasus III GC TOF |
Ion Mode | POSITIVE |
Units | counts |
Chromatography:
Chromatography ID: | CH000459 |
Methods Filename: | Data_Dictionary_Fiehn_laboratory_GCTOF_MS_primary_metabolism_10-15-2013_general.pdf |
Instrument Name: | Agilent 6890N |
Column Name: | Restek Corporation Rtx-5Sil MS |
Column Pressure: | 7.7 PSI |
Column Temperature: | 50-330C |
Flow Rate: | 1 ml/min |
Injection Temperature: | 50 C ramped to 250 C by 12 C/s |
Sample Injection: | 0.5 uL |
Oven Temperature: | 50°C for 1 min, then ramped at 20°C/min to 330°C, held constant for 5 min |
Transferline Temperature: | 230C |
Washing Buffer: | Ethyl Acetate |
Sample Loop Size: | 30 m length x 0.25 mm internal diameter |
Randomization Order: | Excel generated |
Chromatography Type: | GC |
MS:
MS ID: | MS000567 |
Analysis ID: | AN000634 |
Instrument Name: | Leco Pegasus III GC TOF |
Instrument Type: | GC-TOF |
MS Type: | EI |
Ion Mode: | POSITIVE |
Ion Source Temperature: | 250 C |
Ionization Energy: | 70 eV |
Mass Accuracy: | Nominal |
Source Temperature: | 250 C |
Scan Range Moverz: | 85-500 Da |
Scanning Cycle: | 17 Hz |
Scanning Range: | 85-500 Da |
Skimmer Voltage: | 1850 V |