Return to study ST000603 main page
MB Sample ID: SA033307
| Local Sample ID: | 160427blvsa10_1 |
| Subject ID: | SU000626 |
| Subject Type: | Human |
| Subject Species: | Homo sapiens |
| Taxonomy ID: | 9606 |
| Species Group: | Human |
Select appropriate tab below to view additional metadata details:
Subject:
| Subject ID: | SU000626 |
| Subject Type: | Human |
| Subject Species: | Homo sapiens |
| Taxonomy ID: | 9606 |
| Species Group: | Human |
Factors:
| Local Sample ID | MB Sample ID | Factor Level ID | Level Value | Factor Name |
|---|---|---|---|---|
| 160427blvsa10_1 | SA033307 | FL007369 | control | Treatment |
Collection:
| Collection ID: | CO000620 |
| Collection Summary: | First morning urine specimens were obtained using clean catch methods, and sent to clinical laboratory. After a 10 min centrifugation to remove cell debris, urine specimens were stored at −80◦C until further analysis. |
| Sample Type: | Urine |
Treatment:
| Treatment ID: | TR000640 |
| Treatment Summary: | No treatment |
Sample Preparation:
| Sampleprep ID: | SP000633 |
| Sampleprep Summary: | 1. Vortex the urine samples for about 10s to obtain a homogenized sample using the MiniVortexer VWR. 2. Aliquot 15-30ul and add 1ml extraction solution. The extraction solution has to be pre-chilled using the ThermoElectron Neslab RTE 740 cooling bath set to -20°C. 3. Vortex the sample for about 10s and shake for 5min at 4°C using the Orbital Mixing Chilling/Heating plate. If you are using more than one sample, keep the rest of the samples on ice (chilled at <0°C with NaCl). 4. Centrifuge samples for 2min at 14000 rcf using the centrifuge Eppendorf 5415 D. 5. Aliquot 2X 0.5ml supernatant. One for analysis and one for backup. Store 2nd aliquot in -20°C freezer. 6. Evaporate 0.5ml aliquots of the sample in the Labconco Centrivap cold trap concentrator to complete dryness. 7. Submit to derivatization. |
| Sampleprep Protocol Filename: | SOP_Extraction_of_Urine.pdf |
Combined analysis:
| Analysis ID | AN000923 |
|---|---|
| Analysis type | MS |
| Chromatography type | GC |
| Chromatography system | Agilent |
| Column | Restek Rtx-5Sil (30m x 0.25mm,0.25um) |
| MS Type | EI |
| MS instrument type | GC Ion Trap |
| MS instrument name | Varian 210-MS GC Ion Trap |
| Ion Mode | POSITIVE |
| Units | Counts |
Chromatography:
| Chromatography ID: | CH000659 |
| Instrument Name: | Agilent |
| Column Name: | Restek Rtx-5Sil (30m x 0.25mm,0.25um) |
| Column Pressure: | 7.7 PSI (initial condition) |
| Column Temperature: | 50 - 330°C |
| Flow Rate: | 1 ml/min |
| Injection Temperature: | 50°C ramped to 250°C by 12°C/s |
| Sample Injection: | 0.5µl |
| Oven Temperature: | 50°C for 1 min, then ramped at 20°C/min to 330°C, held constant for 5 min |
| Transferline Temperature: | 230°C |
| Washing Buffer: | Ethyl Acetate |
| Sample Loop Size: | 30 m length x 0.25 mm internal diameter |
| Randomization Order: | Excel generated |
| Chromatography Type: | GC |
MS:
| MS ID: | MS000821 |
| Analysis ID: | AN000923 |
| Instrument Name: | Varian 210-MS GC Ion Trap |
| Instrument Type: | GC Ion Trap |
| MS Type: | EI |
| Ion Mode: | POSITIVE |
| Ion Source Temperature: | 250°C |
| Ionization Energy: | 70eV |
| Mass Accuracy: | Nominal |
| Source Temperature: | 250°C |
| Scanning Cycle: | 17 Hz |
| Scanning Range: | 85-500 |
| Skimmer Voltage: | 1850 V |
