Return to study ST001332 main page
MB Sample ID: SA096557
Local Sample ID: | 20190326_BJJ_Acyl_carnitines_Sample_5_BIG |
Subject ID: | SU001406 |
Subject Type: | Invertebrate |
Subject Species: | Caenorhabditis elegans |
Taxonomy ID: | 6239 |
Select appropriate tab below to view additional metadata details:
Combined analysis:
Analysis ID | AN002221 |
---|---|
Analysis type | MS |
Chromatography type | Reversed phase |
Chromatography system | Shimadzu 20AD |
Column | Waters Acquity UPLC CSH C18(50 x 2.1mm ,1.7um) |
MS Type | ESI |
MS instrument type | Orbitrap |
MS instrument name | Thermo Exactive |
Ion Mode | UNSPECIFIED |
Units | Area ratio |
Chromatography:
Chromatography ID: | CH001629 |
Chromatography Summary: | Full chromatographic separation of intact lipids (4) was achieved using Shimadzu HPLC System (Shimadzu UK Limited, Milton Keynes, United Kingdom) with the injection of 10 µL onto a Waters Acquity UPLC® CSH C18 column; 1.7 µm, I.D. 2.1 mm X 50 mm, maintained at 55 °C. Mobile phase A was 6:4, acetonitrile and water with 10 mM ammonium formate. Mobile phase B was 9:1, propan-2-ol and acetonitrile with 10 mM ammonium formate. The flow was maintained at 500 µL per minute through the following gradient: 0.00 minutes_40% mobile phase B; 0.40 minutes_43% mobile phase B; 0.45 minutes_50% mobile phase B; 2.40 minutes_54% mobile phase B; 2.45 minutes_70% mobile phase B; 7.00 minutes_99% mobile phase B; 8.00 minutes_99% mobile phase B; 8.3 minutes_40% mobile phase B; 10 minutes_40% mobile phase B; 10.00 minutes_40% mobile phase B. The sample injection needle was washed using 9:1, 2-propan-2-ol and acetonitrile with 0.1 % formic acid. The mass spectrometer used was the Thermo Scientific Exactive Orbitrap with a heated electrospray ionisation source (Thermo Fisher Scientific, Hemel Hempstead, UK). The mass spectrometer was calibrated immediately before sample analysis using positive and negative ionisation calibration solution (recommended by Thermo Scientific). Additionally, the heated electrospray ionisation source was optimised at 50:50 mobile phase A to mobile phase B for spray stability (capillary temperature; 380 °C, source heater temperature; 420 °C, sheath gas flow; 60 (arbitrary), auxiliary gas flow; 20 (arbitrary), sweep gas; 5 (arbitrary), source voltage; 3.5 kV. The mass spectrometer resolution was set to 25,000 with a full-scan range of m/z 100 to 1,800 Da, with continuous switching between positive and negative mode. Lipid quantification was achieved using the area under the curve (AUC) of the corresponding high resolution extracted ion chromatogram (with a window of ± 8 ppm) at the indicative retention time. The lipid analyte AUC relative to the associated internal standard AUC for that lipid class was used to semi-quantify and correct for any extraction/instrument variation. |
Instrument Name: | Shimadzu 20AD |
Column Name: | Waters Acquity UPLC CSH C18(50 x 2.1mm ,1.7um) |
Column Temperature: | 55 |
Flow Gradient: | 0.00 minutes_40% mobile phase B; 0.40 minutes_43% mobile phase B; 0.45 minutes_50% mobile phase B; 2.40 minutes_54% mobile phase B; 2.45 minutes_70% mobile phase B; 7.00 minutes_99% mobile phase B; 8.00 minutes_99% mobile phase B; 8.3 minutes_40% mobile phase B; 10 minutes_40% mobile phase B; 10.00 minutes_40% mobile phase B. The sample injection needle was washed using 9:1, 2-propan-2-ol and acetonitrile with 0.1 % formic acid. |
Flow Rate: | 500 µL/min |
Solvent A: | 60% acetonitrile/40% water; 10 mM ammonium formate |
Solvent B: | 90% isopropanol/10% acetonitrile; 10 mM ammonium formate |
Chromatography Type: | Reversed phase |