Return to study ST002429 main page
MB Sample ID: SA242862
Local Sample ID: | OilPalm_Salt_10_14DAT_R4_POS |
Subject ID: | SU002518 |
Subject Type: | Plant |
Subject Species: | Elaeis guineensis Jacq. |
Taxonomy ID: | NCBI:txid51953 |
Select appropriate tab below to view additional metadata details:
Combined analysis:
Analysis ID | AN003953 | AN003954 |
---|---|---|
Analysis type | MS | MS |
Chromatography type | Reversed phase | Reversed phase |
Chromatography system | Shimadzu Nexera X2 | Shimadzu Nexera X2 |
Column | Waters Acquity BEH HSS T3 (100 x 2.1mm, 1.8um) | Waters Acquity BEH HSS T3 (100 x 2.1mm, 1.8um) |
MS Type | ESI | ESI |
MS instrument type | QTOF | QTOF |
MS instrument name | Bruker maXis Impact qTOF | Bruker maXis Impact qTOF |
Ion Mode | POSITIVE | NEGATIVE |
Units | Peak intensity | Peak intensity |
MS:
MS ID: | MS003688 |
Analysis ID: | AN003953 |
Instrument Name: | Bruker maXis Impact qTOF |
Instrument Type: | QTOF |
MS Type: | ESI |
MS Comments: | The rate of acquisition spectra was 3.00 Hz, mass range m/z 70–1200 for the polar fraction analysis and m/z 300–1600 for the lipidic fraction. High-resolution mass spectrometry was used for detection (MaXis 4G Q-TOF MS, Bruker Daltonics) equipped with an electrospray source in positive (ESI-(+)-MS) and negative (ESI-(−)-MS) modes. The settings of the mass spectrometer were as follows: capillary voltage, 3800 V; dry gas flow, 9 L min−1; dry temperature, 200 °C; nebulizer pressure, 4 bar; final plate offset, 500 V. For the external calibration of the equipment, we used a sodium formate solution (10 mM HCOONa solution in 50:50 v:v isopropanol and water containing 0.2% formic acid) injected through a six-way valve at the beginning of each chromatographic run. Ampicillin ([M+H] + m/z 350.1186729 and [M-H]- m/z 348.1028826) was the internal standard for later peak normalization on data analysis. |
Ion Mode: | POSITIVE |
MS ID: | MS003689 |
Analysis ID: | AN003954 |
Instrument Name: | Bruker maXis Impact qTOF |
Instrument Type: | QTOF |
MS Type: | ESI |
MS Comments: | The rate of acquisition spectra was 3.00 Hz, mass range m/z 70–1200 for the polar fraction analysis and m/z 300–1600 for the lipidic fraction. High-resolution mass spectrometry was used for detection (MaXis 4G Q-TOF MS, Bruker Daltonics) equipped with an electrospray source in positive (ESI-(+)-MS) and negative (ESI-(−)-MS) modes. The settings of the mass spectrometer were as follows: capillary voltage, 3800 V; dry gas flow, 9 L min−1; dry temperature, 200 °C; nebulizer pressure, 4 bar; final plate offset, 500 V. For the external calibration of the equipment, we used a sodium formate solution (10 mM HCOONa solution in 50:50 v:v isopropanol and water containing 0.2% formic acid) injected through a six-way valve at the beginning of each chromatographic run. Ampicillin ([M+H] + m/z 350.1186729 and [M-H]- m/z 348.1028826) was the internal standard for later peak normalization on data analysis. |
Ion Mode: | NEGATIVE |