Return to study ST002697 main page
MB Sample ID: SA267112
| Local Sample ID: | CR1-02-8898 |
| Subject ID: | SU002800 |
| Subject Type: | Mammal |
| Subject Species: | Mus musculus |
| Taxonomy ID: | 10090 |
| Species Group: | C57/Bl6 mice |
Select appropriate tab below to view additional metadata details:
Combined analysis:
| Analysis ID | AN004371 |
|---|---|
| Analysis type | MS |
| Chromatography type | Reversed phase |
| Chromatography system | Bruker Elute |
| Column | Hamilton Intensity Solo 2 C18 (100 x 2.1 mm, 1.8 um) |
| MS Type | ESI |
| MS instrument type | QTOF |
| MS instrument name | Bruker timsTOF |
| Ion Mode | POSITIVE |
| Units | AU |
MS:
| MS ID: | MS004119 |
| Analysis ID: | AN004371 |
| Instrument Name: | Bruker timsTOF |
| Instrument Type: | QTOF |
| MS Type: | ESI |
| MS Comments: | The MS analysis was performed using a TimsTOF (Bruker, Darmstadt, Germany) with Apollo II electrospray ionization (ESI) source. The drying gas was set to flow at 10 L/min and the drying temperature to 220C and the nebulizer pressure to 2.2 bar. The capillary voltage was 4500 V and the end plate offset 500V. For metabolomics the scan range was 20-1300 m/z. The collision energy was set to 20 eV, the cycle time to 0.5 seconds with a relative minimum intensity threshold of 400 counts per thousand and target intensity of 20,000. Sodium formate was injected as an external calibrant in the first 0.3 minutes of each LC-MS/MS run. MetaboScape 4.0 software was used for metabolite processing and statistical analysis (Bruker Daltonics). The following parameters for molecular feature identification and "bucketing" were set in the T-ReX 2D/3D workflow: For peak detection, a minimum intensity threshold of 1,000 counts is required, as well as a minimum peak duration of 7 spectra, with feature quantification determine using peak area. The file masses were recalibrated based on the external calibrant injected between 0-0.3 min. |
| Ion Mode: | POSITIVE |
