Return to study ST001610 main page
MB Sample ID: SA136754
Local Sample ID: | Controlinvitro_4 |
Subject ID: | SU001687 |
Subject Type: | Cultured cells |
Subject Species: | Homo sapiens |
Taxonomy ID: | 9606 |
Cell Strain Details: | Human Lung epithelial A549 cancer cells |
Select appropriate tab below to view additional metadata details:
Combined analysis:
Analysis ID | AN002644 |
---|---|
Analysis type | MS |
Chromatography type | Reversed phase |
Chromatography system | Agilent 1290 |
Column | Poroshell 120 SB-C18 (100 x 2.1mm,2.7um) |
MS Type | ESI |
MS instrument type | QTOF |
MS instrument name | Agilent 6545 QTOF |
Ion Mode | POSITIVE |
Units | Normalized abundances |
Chromatography:
Chromatography ID: | CH001953 |
Chromatography Summary: | The entire LC/MS-MS experiment was performed in the Campus Chemical Instrumentation Center’s Mass Spectrometry and Proteomics facility at The Ohio State University. Lyophilized samples were dissolved in equal amounts of LC-MS grade water and acetonitrile and run with LC/MS-MS analysis, using an untargeted metabolomics approach by utilizing Agilent Q-TOF 6545 mass spectrometer connected to an Agilent 1290 UHPLC system with a Poroshell 120 SB-C18 (2 x 100 mm, 2.7 µm particle size) column. The LC gradient consisted of solvent A, H2O with 0.1 % Formic acid, and solvent B, 100 % acetonitrile at a 200 µL/min flow rate with an initial 2 % solvent B with a linear ramp to 95 % B at 15 min, holding at 95% B for 1 minutes, and back to 2 % B from 16 min and equilibration of 2 % B until min 32. A 5 µL volume sample was injected for each run and the top 5 ions were selected for data-dependent analysis with a 15 second exclusion window. |
Instrument Name: | Agilent 1290 |
Column Name: | Poroshell 120 SB-C18 (100 x 2.1mm,2.7um) |
Column Pressure: | 800 bar |
Column Temperature: | 40 |
Flow Gradient: | an initial 2 % solvent B with a linear ramp to 95 % B at 15 min, holding at 95% B for 1 minutes, and back to 2 % B from 16 min and equilibration of 2 % B until min 32. |
Flow Rate: | 200 µL/min |
Sample Injection: | 5 µL |
Solvent A: | 100% water; 0.1% formic acid |
Solvent B: | 100% acetonitrile |
Capillary Voltage: | 500 V |
Chromatography Type: | Reversed phase |