Return to study ST000324 main page
MB Sample ID: SA014656
| Local Sample ID: | 196 |
| Subject ID: | SU000344 |
| Subject Type: | Animal |
| Subject Species: | Bos taurus |
| Taxonomy ID: | 9913 |
| Species Group: | Mammal |
Select appropriate tab below to view additional metadata details:
Subject:
| Subject ID: | SU000344 |
| Subject Type: | Animal |
| Subject Species: | Bos taurus |
| Taxonomy ID: | 9913 |
| Species Group: | Mammal |
Factors:
| Local Sample ID | MB Sample ID | Factor Level ID | Level Value | Factor Name |
|---|---|---|---|---|
| 196 | SA014656 | FL003296 | Follicle Fluid | Organ |
Collection:
| Collection ID: | CO000338 |
| Collection Summary: | Follicular Fluid: Follicular Fluid were obtained by postmortem aspiration of the ovarian dominant follicle and kept at 80ºC. There was no inactivation or attenuation because samples are not biohazard. |
| Collection Protocol Filename: | StudyDesign-MarioBinelli-101414.pdf |
| Sample Type: | Follicular fluid |
Treatment:
| Treatment ID: | TR000358 |
| Treatment Summary: | There was no specific treatment. A hormonal protocol was applied to control follicle growth to yield larger or smaller preovulatory follicle and CLs and consequently different circulating Progesterone (P4) concentrations during early diestrus. The two different animal's group are: high or low progesterone levels. |
| Treatment Protocol Filename: | StudyDesign-MarioBinelli-101414.pdf |
Sample Preparation:
| Sampleprep ID: | SP000352 |
| Sampleprep Summary: | - |
| Sampleprep Protocol Filename: | SOP_Extraction_of_Mammalian_Tissue_Samples.pdf |
Combined analysis:
| Analysis ID | AN000516 | AN000517 |
|---|---|---|
| Analysis type | MS | MS |
| Chromatography type | Reversed phase | Reversed phase |
| Chromatography system | Unspecified | Unspecified |
| Column | Waters Acquity CSH C18 (100 x 2.1mm,1.7um) | Waters Acquity CSH C18 (100 x 2.1mm,1.7um) |
| MS Type | ESI | ESI |
| MS instrument type | QTOF | QTOF |
| MS instrument name | Agilent 6530 QTOF | Agilent 6550 QTOF |
| Ion Mode | POSITIVE | NEGATIVE |
| Units | Peak height | Peak height |
Chromatography:
| Chromatography ID: | CH000362 |
| Chromatography Summary: | UPLC |
| Methods Filename: | Data_Dictionary_Fiehn_laboratory_CSH_QTOF_lipidomics_05-29-2014.pdf |
| Instrument Name: | Unspecified |
| Column Name: | Waters Acquity CSH C18 (100 x 2.1mm,1.7um) |
| Column Pressure: | 450-850 bar |
| Column Temperature: | 65 C |
| Flow Gradient: | 15% B to 99% B |
| Flow Rate: | 0.6 mL/min |
| Internal Standard: | See data dictionary |
| Retention Time: | See data dictionary |
| Sample Injection: | 1.67 uL |
| Solvent A: | 60% acetonitrile/40% water; 10mM formic acid; 10mM ammonium formate |
| Solvent B: | 90% isopropanol/10% acetonitrile; 10mM formic acid; 10mM ammonium formate |
| Analytical Time: | 13 min |
| Capillary Voltage: | 3500 |
| Time Program: | 15 min |
| Weak Wash Solvent Name: | Isopropanol |
| Weak Wash Volume: | 5 seconds |
| Strong Wash Solvent Name: | Isopropanol |
| Target Sample Temperature: | Autosampler temp 4 C |
| Randomization Order: | Excel |
| Chromatography Type: | Reversed phase |
MS:
| MS ID: | MS000452 |
| Analysis ID: | AN000516 |
| Instrument Name: | Agilent 6530 QTOF |
| Instrument Type: | QTOF |
| MS Type: | ESI |
| MS Comments: | Lipidomics runs are MS1 data; Identifications made from pooled MS/MS runs |
| Ion Mode: | POSITIVE |
| Capillary Voltage: | 3500 |
| Collision Gas: | Nitrogen |
| Dry Gas Flow: | 8 l/min |
| Dry Gas Temp: | 325 |
| Fragment Voltage: | 120 |
| Fragmentation Method: | Auto MS/MS |
| Ion Source Temperature: | 325 |
| Ion Spray Voltage: | 1000 |
| Ionization: | Pos |
| Precursor Type: | Intact Molecule |
| Reagent Gas: | Nitrogen |
| Source Temperature: | 325 C |
| Desolvation Gas Flow: | 11 l/min |
| Desolvation Temperature: | 350 C |
| Nebulizer: | 35 psig |
| Octpole Voltage: | 750 |
| Resolution Setting: | Extended Dynamic Range |
| Scan Range Moverz: | 60-1700 Da |
| Scanning Cycle: | 2 Hz |
| Scanning Range: | 60-1700 Da |
| Skimmer Voltage: | 65 |
| MS ID: | MS000453 |
| Analysis ID: | AN000517 |
| Instrument Name: | Agilent 6550 QTOF |
| Instrument Type: | QTOF |
| MS Type: | ESI |
| MS Comments: | Lipidomics runs are MS1 data; Identifications made from pooled MS/MS runs |
| Ion Mode: | NEGATIVE |
| Capillary Voltage: | 3500 |
| Collision Gas: | Nitrogen |
| Dry Gas Flow: | 8 l/min |
| Dry Gas Temp: | 325 |
| Fragment Voltage: | 120 |
| Fragmentation Method: | Auto MS/MS |
| Ion Source Temperature: | 325 |
| Ion Spray Voltage: | 1000 |
| Ionization: | Pos |
| Precursor Type: | Intact Molecule |
| Reagent Gas: | Nitrogen |
| Source Temperature: | 325 C |
| Desolvation Gas Flow: | 11 l/min |
| Desolvation Temperature: | 350 C |
| Nebulizer: | 35 psig |
| Octpole Voltage: | 750 |
| Resolution Setting: | Extended Dynamic Range |
| Scan Range Moverz: | 60-1700 Da |
| Scanning Cycle: | 2 Hz |
| Scanning Range: | 60-1700 Da |
| Skimmer Voltage: | 65 |
