Return to study ST002237 main page
MB Sample ID: SA213116
| Local Sample ID: | 625-1 |
| Subject ID: | SU002323 |
| Subject Type: | Mammal |
| Subject Species: | Mus musculus |
| Taxonomy ID: | 10090 |
Select appropriate tab below to view additional metadata details:
Combined analysis:
| Analysis ID | AN003650 |
|---|---|
| Analysis type | MS |
| Chromatography type | HILIC |
| Chromatography system | Thermo Dionex Ultimate 3000 |
| Column | Waters Xbridge Amide (100 x 3mm,3.5um) |
| MS Type | ESI |
| MS instrument type | Orbitrap |
| MS instrument name | Thermo Q Exactive Orbitrap |
| Ion Mode | UNSPECIFIED |
| Units | Peak area |
Chromatography:
| Chromatography ID: | CH002704 |
| Chromatography Summary: | Samples were analyzed by High-Performance Liquid Chromatography and High-Resolution Mass Spectrometry and Tandem Mass Spectrometry (HPLC-MS/MS). Specifically, system consisted of a Thermo Q-Exactive in line with an electrospray source and an Ultimate3000 (Thermo) series HPLC consisting of a binary pump, degasser, and auto-sampler outfitted with a Xbridge Amide column (Waters; dimensions of 3.0 mm × 100 mm and a 3.5 µm particle size). The mobile phase A contained 95% (vol/vol) water, 5% (vol/vol) acetonitrile, 10 mM ammonium hydroxide, 10 mM ammonium acetate, pH = 9.0; B was 100% Acetonitrile. The gradient was as following: 0 min, 15% A; 2.5 min, 30% A; 7 min, 43% A; 16 min, 62% A; 16.1-18 min, 75% A; 18-25 min, 15% A with a flow rate of 150 μL/min. The capillary of the ESI source was set to 275 °C, with sheath gas at 35 arbitrary units, auxiliary gas at 5 arbitrary units and the spray voltage at 4.0 kV. In positive/negative polarity switching mode, an m/z scan range from 60 to 900 was chosen and MS1 data was collected at a resolution of 70,000. The automatic gain control (AGC) target was set at 1 × 106 and the maximum injection time was 200 ms. The top 5 precursor ions were subsequently fragmented, in a data-dependent manner, using the higher energy collisional dissociation (HCD) cell set to 30% normalized collision energy in MS2 at a resolution power of 17,500. Besides matching m/z, metabolites are identified by matching either retention time with analytical standards and/or MS2 fragmentation pattern. Data acquisition and analysis were carried out by Xcalibur 4.1 software and Tracefinder 4.1 software, respectively (both from Thermo Fisher Scientific). |
| Instrument Name: | Thermo Dionex Ultimate 3000 |
| Column Name: | Waters Xbridge Amide (100 x 3mm,3.5um) |
| Flow Gradient: | 0 min, 15% A; 2.5 min, 30% A; 7 min, 43% A; 16 min, 62% A; 16.1-18 min, 75% A; 18-25 min, 15% A |
| Flow Rate: | 150 µL/min |
| Solvent A: | 95% water/5% acetonitrile; 10 mM ammonium hydroxide; 10 mM ammonium acetate, pH 9.0 |
| Solvent B: | 100% acetonitrile |
| Chromatography Type: | HILIC |
