Return to study ST001841 main page

MB Sample ID: SA171326

Local Sample ID:AW_F_CO_2h_007
Subject ID:SU001918
Subject Type:Mammal
Subject Species:Mus musculus
Taxonomy ID:10090
Gender:Not applicable

Select appropriate tab below to view additional metadata details:

Combined analysis:

Analysis ID AN002984
Analysis type MS
Chromatography type HILIC
Chromatography system Agilent 6550
Column Waters Acquity BEH Amide (150 x 2.1mm,1.7um)
MS Type EI
MS instrument type HILIC
MS instrument name Agilent 6550 QTOF
Ion Mode UNSPECIFIED
Units normalized peak height

MS:

MS ID:MS002774
Analysis ID:AN002984
Instrument Name:Agilent 6550 QTOF
Instrument Type:HILIC
MS Type:EI
MS Comments:LC/MS parameters The LC/QTOFMS analyses are performed using an Agilent 1290 Infinity LC system (G4220A binary pump, G4226A autosampler, and G1316C Column Thermostat). Polar compounds are separated on an Acquity UPLC BEH Amide Column, 130Å, 1.7 µm, 2.1 mm X 150 mm maintained at 45°C at a flow-rate of 0.4 mL/min. Solvent pre-heating (Agilent G1316) was used. The mobile phases consist of: Water, 10 mM Ammonium Formate, 0.125% Formic Acid (A) and Acetonitrile: Water (95/5, v/v), 10 mM Ammonium Formate, 0.125% Formic Acid (B) The gradient is as follows: 0 min 100% (A); 0–2 min 100% (A); 2–7.7 min 30% (A); 7.7–9.5 min 60% (A); 9.5–10.3 min 70% (A); 10.3–12.8 min 0% (A); 12.8–16.8 min 0% (A. A sample volume of 1 µL for positive mode and 3 µL for negative mode is used for the injection. Sample temperature is maintained at 4°C in the autosampler. spectrometers are operated with electrospray ionization (ESI) performing full scan in the mass range m/z 50–1200. Number of cycles in MS1 is 1667 with cycle time of 500ms and accumulation time 475ms. Mass spectrometer parameters are as follows (positive mode) Gas Temp 300°C, gas pressures in psi units with : GS1 and GS2 50 psi, CUR: 35. ISVF is 4500V and DP and CE are 10V and 100 V.
Ion Mode:UNSPECIFIED
  logo