Return to study ST002379 main page
MB Sample ID: SA237435
Local Sample ID: | LPS_1 |
Subject ID: | SU002468 |
Subject Type: | Cultured cells |
Subject Species: | Mus musculus |
Taxonomy ID: | 10090 |
Select appropriate tab below to view additional metadata details:
Combined analysis:
Analysis ID | AN003877 | AN003878 |
---|---|---|
Analysis type | MS | MS |
Chromatography type | HILIC | HILIC |
Chromatography system | Thermo Dionex Ultimate 3000 | Thermo Dionex Ultimate 3000 |
Column | Waters XBridge Amide (100 x 4.6mm,3.5um) | Waters XBridge Amide (100 x 4.6mm,3.5um) |
MS Type | ESI | ESI |
MS instrument type | Orbitrap | Orbitrap |
MS instrument name | Thermo Q Exactive Plus Orbitrap | Thermo Q Exactive Plus Orbitrap |
Ion Mode | POSITIVE | NEGATIVE |
Units | Fractional enrichment | Fractional enrichment |
MS:
MS ID: | MS003618 |
Analysis ID: | AN003877 |
Instrument Name: | Thermo Q Exactive Plus Orbitrap |
Instrument Type: | Orbitrap |
MS Type: | ESI |
MS Comments: | For each sample, 3 µL solution was injected into the LC-MS for analysis. The HPLC analysis of the isotope-labeled samples was performed using Ultimate 3000 UHPLC (Dionex) as described (Duan et al., 2022). The mass spectrometry analysis was performed using Q Exactive Plus mass spectrometer (Thermo Fisher Scientific). The mass spectrometers were equipped with a HESI probe and operated in the positive/negative switching mode. When Q Exactive Plus mass spectrometer was used, the relevant parameters were as listed: heater temperature, 120 °C; sheath gas, 30; auxiliary gas, 10; sweep gas, 3; spray voltage, 3.0 kV; capillary temperature, 320°C; S-lens, 55. The resolution was set at 70,000 (at m/z 200). Maximum injection time (max IT) was set at 200 ms and automated gain control (AGC) was set at 3 × 106. The LC-MS peak extraction and integration of the raw data were performed using commercially available software Sieve 2.0 (Thermo Fisher Scientific). The integrated peak area was used to calculate 13C enrichment. Natural abundance correction was performed using software R with Bioconductor R package IsoCorrectoR. |
Ion Mode: | POSITIVE |
MS ID: | MS003619 |
Analysis ID: | AN003878 |
Instrument Name: | Thermo Q Exactive Plus Orbitrap |
Instrument Type: | Orbitrap |
MS Type: | ESI |
MS Comments: | For each sample, 3 µL solution was injected into the LC-MS for analysis. The HPLC analysis of the isotope-labeled samples was performed using Ultimate 3000 UHPLC (Dionex) as described (Duan et al., 2022). The mass spectrometry analysis was performed using Q Exactive Plus mass spectrometer (Thermo Fisher Scientific). The mass spectrometers were equipped with a HESI probe and operated in the positive/negative switching mode. When Q Exactive Plus mass spectrometer was used, the relevant parameters were as listed: heater temperature, 120 °C; sheath gas, 30; auxiliary gas, 10; sweep gas, 3; spray voltage, 3.0 kV; capillary temperature, 320°C; S-lens, 55. The resolution was set at 70,000 (at m/z 200). Maximum injection time (max IT) was set at 200 ms and automated gain control (AGC) was set at 3 × 106. The LC-MS peak extraction and integration of the raw data were performed using commercially available software Sieve 2.0 (Thermo Fisher Scientific). The integrated peak area was used to calculate 13C enrichment. Natural abundance correction was performed using software R with Bioconductor R package IsoCorrectoR. |
Ion Mode: | NEGATIVE |