Return to study ST002382 main page
MB Sample ID: SA237815
| Local Sample ID: | UNK-0047 |
| Subject ID: | SU002471 |
| Subject Type: | Mammal |
| Subject Species: | Rattus norvegicus |
| Taxonomy ID: | 10116 |
Select appropriate tab below to view additional metadata details:
Combined analysis:
| Analysis ID | AN003881 |
|---|---|
| Analysis type | MS |
| Chromatography type | GC |
| Chromatography system | Shimadzu 2030 |
| Column | Agilent DB5-MS (30m x 0.25mm, 0.25um) |
| MS Type | ESI |
| MS instrument type | Triple quadrupole |
| MS instrument name | Shimazu TQ8040 |
| Ion Mode | UNSPECIFIED |
| Units | Peak area |
MS:
| MS ID: | MS003621 |
| Analysis ID: | AN003881 |
| Instrument Name: | Shimazu TQ8040 |
| Instrument Type: | Triple quadrupole |
| MS Type: | ESI |
| MS Comments: | The GC-MS system consisted of an AOC6000 autosampler, a 2030 Shimadzu gas chromatograph and a TQ8040 quadrupole mass spectrometer (Shimadzu, Japan), which was tuned according to the manufacturer’s recommendations using tris-(perfluorobutyl)-amine (CF43). GC-MS was performed on a 30 m Agilent DB-5 column with 1 µm film thickness and 0.25 mm internal diameter. The injection temperature (Inlet) and the MS transfer line were both set at 280°C and the ion source adjusted to 200°C. Helium was used as the carrier gas at a flow rate of 1 mL/min and argon gas was used as the collision cell gas to generate the multiple reaction monitoring (MRM) product ion. The analysis was performed under the following temperature program; start at injection 100°C, a hold for 4 minutes followed by a 10°C min-1 oven temperature ramp to 320°C followed by a final hold off of 11 minutes. Approximately 520 quantifying MRM targets were collected using Shimadzu Smart Database along with qualifier for each target, which covers about 350 endogenous metabolites and multiple 13C labelled internal standards. Both chromatograms and MRMs were evaluated using the Shimadzu GCMS browser and LabSolutions Insight software. |
| Ion Mode: | UNSPECIFIED |
