Summary of Study ST003160

This data is available at the NIH Common Fund's National Metabolomics Data Repository (NMDR) website, the Metabolomics Workbench, https://www.metabolomicsworkbench.org, where it has been assigned Project ID PR001965. The data can be accessed directly via it's Project DOI: 10.21228/M8QQ8P This work is supported by NIH grant, U2C- DK119886.

See: https://www.metabolomicsworkbench.org/about/howtocite.php

This study contains a large results data set and is not available in the mwTab file. It is only available for download via FTP as data file(s) here.

Perform statistical analysis  |  Show all samples  |  Show named metabolites  |  Download named metabolite data  
Download mwTab file (text)   |  Download mwTab file(JSON)   |  Download data files (Contains raw data)
Study IDST003160
Study TitleNew class of heterospirocyclic compounds present strong and rapid activity against artemisinin- and multidrug-resistant P. falciparum parasites
Study SummaryMalaria remains a significant health burden and a leading contributor to global mortality rates. Increasing drug resistance creates an urgent demand for novel treatment options. We have synthesised a new class of heterospirocyclic compounds with novel chemical connectivities. Compounds 25 and 26 display antimalarial activity within 24 h and have similar potency against a panel of drug-resistant strains of Plasmodium falciparum, the most virulent of human malaria parasites, including parasites resistant to the frontline artemisinin antimalarials. C25 and C26 do not induce major toxicity in kidney- and hepatic-derived human cell lines, highlighting their specificity. Untargeted metabolomics analysis of P. falciparum infected red blood cells revealed that the mechanism of action of C25 involves disruption of the pyrimidine biosynthesis pathway and haemoglobin catabolism. These heterospirocyclic compounds represent a promising opportunity for antimalarial drug development and could prove relevant against drug resistant malaria.
Institute
Monash University
Last NameGiannangelo
First NameCarlo
Address381 Royal Parade, Parkville, Victoria, 3052, Australia
Emailcarlo.giannangelo@monash.edu
Phone99039282
Submit Date2024-04-06
Raw Data AvailableYes
Raw Data File Type(s)raw(Thermo)
Analysis Type DetailLC-MS
Release Date2024-04-29
Release Version1
Carlo Giannangelo Carlo Giannangelo
https://dx.doi.org/10.21228/M8QQ8P
ftp://www.metabolomicsworkbench.org/Studies/ application/zip

Select appropriate tab below to view additional metadata details:


Project:

Project ID:PR001965
Project DOI:doi: 10.21228/M8QQ8P
Project Title:New class of heterospirocyclic compounds present strong and rapid activity against artemisinin- and multidrug-resistant P. falciparum parasites
Project Summary:Malaria remains a significant health burden and a leading contributor to global mortality rates. Increasing drug resistance creates an urgent demand for novel treatment options. We have synthesised a new class of heterospirocyclic compounds with novel chemical connectivities. Compounds 25 and 26 display antimalarial activity within 24 h and have similar potency against a panel of drug-resistant strains of Plasmodium falciparum, the most virulent of human malaria parasites, including parasites resistant to the frontline artemisinin antimalarials. C25 and C26 do not induce major toxicity in kidney- and hepatic-derived human cell lines, highlighting their specificity. Untargeted metabolomics analysis of P. falciparum infected red blood cells revealed that the mechanism of action of C25 involves disruption of the pyrimidine biosynthesis pathway and haemoglobin catabolism. These heterospirocyclic compounds represent a promising opportunity for antimalarial drug development and could prove relevant against drug resistant malaria.
Institute:Monash University
Last Name:Giannangelo
First Name:Carlo
Address:381 Royal Parade, Parkville, Victoria, 3052, Australia
Email:carlo.giannangelo@monash.edu
Phone:99039282

Subject:

Subject ID:SU003279
Subject Type:Cultured cells
Subject Species:Plasmodium falciparum
Taxonomy ID:5833
Species Group:3D7 strain

Factors:

Subject type: Cultured cells; Subject species: Plasmodium falciparum (Factor headings shown in green)

mb_sample_id local_sample_id Sample source Treatment
SA342802ATV_1iRBC Atovaquone
SA342803ATV_4iRBC Atovaquone
SA342804ATV_3iRBC Atovaquone
SA342805ATV_2iRBC Atovaquone
SA342806C25_4iRBC C25
SA342807C25_3iRBC C25
SA342808C25_1iRBC C25
SA342809C25_2iRBC C25
SA342810C25_0HR_3iRBC C25_0HR_control
SA342811C25_0HR_2iRBC C25_0HR_control
SA342812C25_0HR_4iRBC C25_0HR_control
SA342813C25_0HR_1iRBC C25_0HR_control
SA342814DMSO_3iRBC DMSO
SA342815DMSO_2iRBC DMSO
SA342816DMSO_1iRBC DMSO
SA342817DMSO_4iRBC DMSO
SA342818PS027_1iRBC PS027
SA342819PS027_4iRBC PS027
SA342820PS027_2iRBC PS027
SA342821PS027_3iRBC PS027
Showing results 1 to 20 of 20

Collection:

Collection ID:CO003272
Collection Summary:Plasmodium falciparum cultures (3D7 strain) synchronised to the trophozoite stage were magnet purified to achieve a parasitaemia of >90% and haematocrit of 0.5%. Four different experiment conditions were used: (i) the active heterospirocyclic compound, compound 25 (C25); (ii) the inactive precursor of compound 25, PS027; (iii) atovaquone; and (iv) DMSO alone as the negative (no drug) control. Following compound incubation (5 h), cultures were centrifuged at 2,000 RPM for 5 minutes, the media was removed and the cell pellets were washed in ice cold PBS. All samples were centrifuged at 1,200g for 3 minutes, after which metabolites were extracted from 5e7 cells using 100 µL of ice-cold methanol extraction solvent. Samples were placed on a shaker at 4°C for 1 h and spun at 13,000 RPM for 10 minutes at 4 °C. Supernatants were transferred into high-performance liquid chromatography (HPLC) vials and stored at -80°C until liquid chromatography-mass spectrometry (LC-MS) analysis. A pooled biological quality control sample consisting of a 15 µL aliquot from each sample was also generated for analytical quality control and to aid metabolite identification.
Sample Type:Plasmodium cells

Treatment:

Treatment ID:TR003288
Treatment Summary:Plasmodium falciparum cultures (3D7 strain) synchronised to the trophozoite stage were magnet purified to achieve a parasitaemia of >90% and haematocrit of 0.5%. Four different experiment conditions were used: (i) the active heterospirocyclic compound, compound 25 (C25); (ii) the inactive precursor of compound 25, PS027; (iii) atovaquone; and (iv) DMSO alone as the negative (no drug) control. Following compound incubation (5 h), cultures were centrifuged at 2,000 RPM for 5 minutes, the media was removed and the cell pellets were washed in ice cold PBS. All samples were centrifuged at 1,200g for 3 minutes, after which metabolites were extracted from 5e7 cells using 100 µL of ice-cold methanol extraction solvent. Samples were placed on a shaker at 4°C for 1 h and spun at 13,000 RPM for 10 minutes at 4 °C. Supernatants were transferred into high-performance liquid chromatography (HPLC) vials and stored at -80°C until liquid chromatography-mass spectrometry (LC-MS) analysis. A pooled biological quality control sample consisting of a 15 µL aliquot from each sample was also generated for analytical quality control and to aid metabolite identification.

Sample Preparation:

Sampleprep ID:SP003286
Sampleprep Summary:Plasmodium falciparum cultures (3D7 strain) synchronised to the trophozoite stage were magnet purified to achieve a parasitaemia of >90% and haematocrit of 0.5%. Four different experiment conditions were used: (i) the active heterospirocyclic compound, compound 25 (C25); (ii) the inactive precursor of compound 25, PS027; (iii) atovaquone; and (iv) DMSO alone as the negative (no drug) control. Following compound incubation (5 h), cultures were centrifuged at 2,000 RPM for 5 minutes, the media was removed and the cell pellets were washed in ice cold PBS. All samples were centrifuged at 1,200g for 3 minutes, after which metabolites were extracted from 5e7 cells using 100 µL of ice-cold methanol extraction solvent. Samples were placed on a shaker at 4°C for 1 h and spun at 13,000 RPM for 10 minutes at 4 °C. Supernatants were transferred into high-performance liquid chromatography (HPLC) vials and stored at -80°C until liquid chromatography-mass spectrometry (LC-MS) analysis. A pooled biological quality control sample consisting of a 15 µL aliquot from each sample was also generated for analytical quality control and to aid metabolite identification.

Combined analysis:

Analysis ID AN005184 AN005185
Analysis type MS MS
Chromatography type HILIC HILIC
Chromatography system Thermo Dionex Ultimate 3000 RS Thermo Dionex Ultimate 3000 RS
Column Merck SeQuant ZIC-HILIC (150 x 4.6mm,5um) Merck SeQuant ZIC-HILIC (150 x 4.6mm,5um)
MS Type ESI ESI
MS instrument type Orbitrap Orbitrap
MS instrument name Thermo Q Exactive Orbitrap Thermo Q Exactive Orbitrap
Ion Mode POSITIVE NEGATIVE
Units Peak height Peak height

Chromatography:

Chromatography ID:CH003922
Instrument Name:Thermo Dionex Ultimate 3000 RS
Column Name:Merck SeQuant ZIC-HILIC (150 x 4.6mm,5um)
Column Temperature:25
Flow Gradient:0–15 min, 80–50% B; 15–18 min, 50–5% B; 18–21 min, 5% B; 21–24 min, 5–80% B and 24–32 min, 80% B
Flow Rate:0.3 mL/min
Solvent A:100% Water; 20 mM ammonium carbonate
Solvent B:100% Acetonitrile
Chromatography Type:HILIC

MS:

MS ID:MS004917
Analysis ID:AN005184
Instrument Name:Thermo Q Exactive Orbitrap
Instrument Type:Orbitrap
MS Type:ESI
MS Comments:Liquid chromatography-mass spectrometry (LC-MS) data was acquired on a Q-Exactive Orbitrap mass spectrometer (Thermo Scientific) coupled with high-performance liquid chromatography system (HPLC, Dionex Ultimate 3000 RS, Thermo Scientific) as described previously (Creek et al. 2016). Samples within the LC-MS batch were sorted according to blocks of replicates and randomized. To facilitate metabolite identification, approximately 350 authentic metabolite standards were analysed prior to the LC-MS batch and their peaks and retention time manually checked using the MZmine software. Pooled biological quality control samples and extraction solvent blanks were analysed periodically throughout the batch to monitor LC-MS signal reproducibility and aid downstream metabolite identification procedures. Raw LC-MS metabolomics data were analysed using the open source software, IDEOM (http://mzmatch.sourceforge.net/ideom.php). Briefly, the IDEOM workflow uses msconvert to convert raw files to mzXML format, XCMS (Centwave) to pick LC-MS peak signals and MZmatch for alignment and annotation of related metabolite peaks. Default IDEOM parameters were used to eliminate unwanted noise and artefact peaks. Confident metabolite identification was made by matching accurate masses to retention time of the ~350 authentic standards. When these authentic standards were unavailable, putative metabolite identification used accurate mass and predicted retention times. Metabolite abundance was represented by LC-MS peak height.
Ion Mode:POSITIVE
  
MS ID:MS004918
Analysis ID:AN005185
Instrument Name:Thermo Q Exactive Orbitrap
Instrument Type:Orbitrap
MS Type:ESI
MS Comments:Liquid chromatography-mass spectrometry (LC-MS) data was acquired on a Q-Exactive Orbitrap mass spectrometer (Thermo Scientific) coupled with high-performance liquid chromatography system (HPLC, Dionex Ultimate 3000 RS, Thermo Scientific) as described previously (Creek et al. 2016). Samples within the LC-MS batch were sorted according to blocks of replicates and randomized. To facilitate metabolite identification, approximately 350 authentic metabolite standards were analysed prior to the LC-MS batch and their peaks and retention time manually checked using the MZmine software. Pooled biological quality control samples and extraction solvent blanks were analysed periodically throughout the batch to monitor LC-MS signal reproducibility and aid downstream metabolite identification procedures. Raw LC-MS metabolomics data were analysed using the open source software, IDEOM (http://mzmatch.sourceforge.net/ideom.php). Briefly, the IDEOM workflow uses msconvert to convert raw files to mzXML format, XCMS (Centwave) to pick LC-MS peak signals and MZmatch for alignment and annotation of related metabolite peaks. Default IDEOM parameters were used to eliminate unwanted noise and artefact peaks. Confident metabolite identification was made by matching accurate masses to retention time of the ~350 authentic standards. When these authentic standards were unavailable, putative metabolite identification used accurate mass and predicted retention times. Metabolite abundance was represented by LC-MS peak height.
Ion Mode:NEGATIVE
  logo