Return to study ST001526 main page
MB Sample ID: SA128591
| Local Sample ID: | SERUM_LCR28344_033 |
| Subject ID: | SU001600 |
| Subject Type: | Mammal |
| Subject Species: | Rattus norvegicus |
| Taxonomy ID: | 10116 |
Select appropriate tab below to view additional metadata details:
Combined analysis:
| Analysis ID | AN002547 |
|---|---|
| Analysis type | MS |
| Chromatography type | GC |
| Chromatography system | Leco |
| Column | Rtx-5Sil MS |
| MS Type | EI |
| MS instrument type | GC-TOF |
| MS instrument name | Leco Pegasus IV TOF |
| Ion Mode | POSITIVE |
| Units | normalized peak height |
MS:
| MS ID: | MS002365 |
| Analysis ID: | AN002547 |
| Instrument Name: | Leco Pegasus IV TOF |
| Instrument Type: | GC-TOF |
| MS Type: | EI |
| MS Comments: | GC-TOF Method: Instruments: Gerstel CIS4 –with dual MPS Injector/ Agilent 6890 GC- Pegasus III TOF MS Injector conditions: Agilent 6890 GC is equipped with a Gerstel automatic liner exchange system (ALEX) that includes a multipurpose sample (MPS2) dual rail, and a Gerstel CIS cold injection system (Gerstel, Muehlheim, Germany) with temperature program as follows: 50°C to 275°C final temperature at a rate of 12 °C/s and hold for 3 minutes. Injection volume is 0.5 μl with 10 μl/s injection speed on a splitless injector with purge time of 25 seconds. Liner (Gerstel #011711-010-00) is changed after every 10 samples, (using the Maestro1 Gerstel software vs. 1.1.4.18). Before and after each injection, the 10 μl injection syringe is washed three times with 10 μl ethyl acetate. Gas Chromatography conditions: A 30 m long, 0.25 mm i.d. Rtx-5Sil MS column (0.25 μm 95% dimethyl 5% diphenyl polysiloxane film) with additional 10 m integrated guard column is used (Restek, Bellefonte PA). 99.9999% pure Helium with built-in purifier (Airgas, Radnor PA) is set at constant flow of 1 ml/min. The oven temperature is held constant at 50°C for 1 min and then ramped at 20°C/min to 330°C at which it is held constant for 5 min. Mass spectrometer settings: A Leco Pegasus IV time of flight mass spectrometer is controlled by the Leco ChromaTOF software vs. 2.32 (St. Joseph, MI). The transfer line temperature between gas chromatograph and mass spectrometer is set to 280°C. Electron impact ionization at 70V is employed with an ion source temperature of 250°C. Acquisition rate is 17 spectra/second, with a scan mass range of 85-500 Da. |
| Ion Mode: | POSITIVE |
